Removes stubborn green and dark deposits as well as stains caused by trees, flowers and vegetation. For all natural stones. Flagstones, pavers, and stone paths are immediately restored to their original colour. Non-acidic.
Field of Use
For thoroughly cleaning outside surfaces made of natural and concrete stone, such as stairs, walkways, walls, etc. Also suitable for removing dark mould stains from silicone joints.
Directions for Use
Use a garden sprayer to apply Lithofin MN Outdoor Cleaner generously in undiluted form. Allow the product to work for up to 4 hours. Brush the surface and rinse with clear water. In very stubborn cases, repeat this procedure.
Please Note: test the product's suitability in an inconspicuous area prior to use. Shield treated surfaces from rain for approx. 4 hours. Protect plants, textiles, metals, wood, etc. The product will damage these surfaces.
Application Temperature: 10 to 22°C. Do not use on warm surfaces.
Coverage: approx. 5 to 10m² per litre
Hint: after several days, treat the surface with Lithofin ALGEX and repeat this treatment on a yearly basis.
The prevention effect of Lithofin ALGEX will keep outdoor surfaces clean and free of green deposits.
Further Treatment
Treating the stone with Lithofin SPLASH-STOP will prevent water and dirt from penetrating into the surface, thereby reducing the tendency to absorb dirt inhibiting the growth of algae.
Storage
After use, remove the sprayer and rinse well with water.
Close the bottle with a child-proof cap. Keep in cool and dark conditions